In this option, the Remote Character Set select UTF-8 (this is the encoding format, I am not sure that it must be set this way)Īs for how to find the option of ttyUSB0, please refer to this articleīecause mine is RS232 to USB, it is ttyUSB0. Serial line input/dev/ttyUSB0 Speed input 115200 or 9600 (selected according to the baud rate) Connection type select Serial Install the driver for it, and then it will display the new device as COM3. If you use USB to serial cable, you can see "other devices" in the device manager. If it is a desktop computer, the serial line defaults to COM1 and COM2 ports. The environment corresponding to this article is linux and windows. Use Putty to enter the system, no adb tool is needed. After clicking the open button, you can enter the linux command in the command interruption, without any intermediate steps (after the ordinary USB of Window is connected, you have to use the adb shell to enter the Android system), and you can also view the debug information, and the system will automatically print it out. Then set the baud rate, there are only two simple steps. If one more is connected, ttyS1 or ttyUSB1 will be displayed in Window, the normal serial port corresponds to It is COM1, COM2, and USB corresponds to COM3 (you need to install the driver, check the specific COM in the device manager). After the serial port is connected by default in Linux, the port is ttyS0 or ttyUSB0 (corresponding to USB to serial port). Only need to set up the port (Serial Line). Using putty for serial port debugging is very simple.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |